beautypg.com

Speakers, Speaker installation, Connecting speakers – Arcam MULTI ZONE POWER AMPLIFIER MZ8 User Manual

Page 8: Speaker installation connecting speakers, Source, Right speaker terminals left speaker terminals

background image

8

Speaker Installation

The MZ12 amplifier allows the connection of up to twelve independent

loudspeaker channels, arranged in six stereo zones. The MZ8 amplifier

provides eight channels in four zones. Each zone is designed to provide

amplification to one room of a multi-room installation; further options

allow for greater flexibility when installing multiple loudspeaker pairs in

a large space.

Connecting speakers

The MZ amplifiers are designed to drive full bandwidth speakers, rated

between 4 and 8 ohms. The unit is fitted with speaker terminals that can

accept either spade terminals or bare wires. Arcam’s Muso speakers are

compact mini-monitor speakers which ideally match the design values

and output characteristics of the MZ amplifier series. Your dealer will

be able to advise you of suitable loudspeakers for other applications, for

example in-ceiling use.

single wiring
Single wiring is the conventional wiring method of running a single cable

per channel between the amplifier and the speaker; this is the easiest

technique.
If each speaker has more than one pair of connecting terminals, use the

terminals labelled LF or ‘Low Frequency’ for each speaker.
Connect the positive terminal of the right speaker connection on the

amplifier (coloured red and labelled +R) to the positive terminal of your

right speaker.
Similarly, connect the negative terminal of the amplifier (coloured black

and labelled with R–) to the negative terminal of your speaker. Repeat

the process for the left speaker, using the amplifier terminals labelled +L

and L–.
If your speakers support bi-wiring, then there is a strip of conductive

metal on the speakers connecting the low-frequency terminals to those

for the higher-frequencies; this mUST NOT BE REmOVED in a single-

wired system.

speakers

Zone 1 of an MZ12 amplifier connected to speakers using single wiring

L

R

AUDIO IN

Z1

Z2

L

R

AUDIO IN

Z5

Z6

Z1

_

_

+

+

R

L

Z2

_

_

+

+

R

L

L

R

AUDIO IN

Z3

Z4

Source

Z1 Z3

Z3

INPUT

Z5

_

_

+

+

R

L

Z6

_

_

+

+

R

L

Z3

_

_

+

+

R

L

Z4

_

_

+

+

R

L

right speaker terminals

left speaker terminals

This manual is related to the following products: