Arcam MULTI ZONE POWER AMPLIFIER MZ8 - Manual (Page 12)

12
Worldwide Guarantee
This entitles you to have the unit repaired free of charge, during the
first two years after purchase, at any authorised Arcam distributor
provided that it was originally purchased from an authorised Arcam
dealer or distributor. The manufacturer can take no responsibility for
defects arising from accident, misuse, abuse, wear and tear, neglect or
through unauthorized adjustment and/or repair, neither can they accept
responsibility for damage or loss occurring during transit to or from the
person claiming under the guarantee.
The warranty covers:
Parts and labour costs for two years from the purchase date. After two
years you must pay for both parts and labour costs. The warranty does
not cover transportation costs at any time.
Continuous power output (1kHz at 0.1% THD)
Single zone, both channels, 8 Ω 80W rms
Single channel, 4 Ω 116W rms
Harmonic distortion, 80% power, 8 Ω at 1kHz 0.01%
Power output, all zones all channels driven, 8Ω at 1kHz, 0.1% THD+N 65W rms per channel
Inputs
Nominal sensitivity 0.9V—1.5V
Input impedance 11k Ω
Signal/noise ratio (CCIR, 45W) 101dB
General
Mains voltage 110—120V or 220—240V
Power consumption (maximum) 600W
Heat dissipation (maximum) 1,715 BTU/h
Power consumption, idle MZ12: 110W; MZ8: 73W
Heat dissipation, idle MZ12: 375BTU/h; MZ8: 256 BTU/h
Power consumption, standby 0.6W
Heat dissipation in standby 2 BTU/h
Dimensions W x D x H (including feet, excluding rack ears and connectors) 432mm x 436.5mm x 144.5mm (19” rackmount x 3U)
Weight (net) MZ12: 24.7 Kg; MZ8 19.3 Kg.
Weight (packed) MZ12: 27.3 Kg; MZ8 21.9 Kg.
Supplied accessories mains lead
E&OE
NOTE: All specification values are typical unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
specifications
product
guarantee
Claims under guarantee
This equipment should be packed in the original packing and returned
to the dealer from whom it was purchased, or failing this, directly to the
Arcam distributor in the country of residence.
It should be sent carriage prepaid by a reputable carrier – not by post. No
responsibility can be accepted for the unit whilst in transit to the dealer
or distributor and customers are therefore advised to insure the unit
against loss or damage whilst in transit.
For further details contact Arcam at:
Arcam Customer Support Department,
Pembroke Avenue,
Waterbeach,
CAMBRIDGE,
CB25 9QR,
England
or via www.arcam.co.uk.
Problems?
If your Arcam dealer is unable to answer any query regarding this or any
other Arcam product please contact Arcam Customer Support at the
above address and we will do our best to help you.
On-line registration
You can register your product on-line at www.arcam.co.uk.