Pfm 9.0 / 9.2 dro safety manual – Pro-Cut PFM 9.2 User Manual

Page 6

Perfect brake job. Every time.

PFM 9.0 / 9.2 DRO

SAFETY MANUAL

No loose clothing or hair. When turned on, this lathe has
exposed rotating components. Long hair or loose clothing
could become entangled and cause injury or death. Do not
wear loose clothing or long hair when using this lathe.

Do not remove guards or covers. This lathe contains several guards and
covers. These guards and covers are there to protect the operator from
hazards underneath. Do not remove any guard or cover. Do not operate
the lathe with any guard or cover removed. If the lathe requires service,
contact authorized service personnel through your Pro-Cut distributor.

Use eye protection. During operation this lathe generates flying dust
and debris. Do not use compressed air to clean the lathe as this can propel
brake dust and create a hazard for the operator or those nearby. Safety
glasses help protect your eyesight from these hazards.

Do not touch any moving part. Contact with rotating parts can cause many types of
injury or even death. Keep all body parts clear of rotating parts. If you need to access
something near a rotating part, switch off the lathe first.

Inspect all electrical connections before using lathe. Prior to using
this lathe:

➣ Check that all cords are free from damage and that all insulation

is intact. Do not use a cord with cut or damaged insulation.

➣ Replace cord if damaged.

10 TECHNOLOGY DRIVE #4, W. LEBANON, NH 03784 USA P. 800.543.6618 / 603.298.5200 FAX. 603.298.8404 [email protected] WWW.PROCUTUSA.COM