Pfm 9.0 / 9.2 dro safety manual, Limits and requirements – Pro-Cut PFM 9.2 User Manual

Page 11

Perfect brake job. Every time.

PFM 9.0 / 9.2 DRO

SAFETY MANUAL

Limits and Requirements:

TECHNICAL DATA:

Rotor Diameter:
PFM-9.0: Ш102- Ш412mm
PFM-9.2: Ш102- Ш437mm
Rotor Thickness: 5-44mm
Spindle RPM: 120 RPM
Carriage Feed Rate: 0.13mm/rev.
Maximum Cut Depth: 0.51mm per side of rotor
Input Voltage: 220-240 Volts AC, 50 Hz
Power required: 1.2 kW
Temperature range: 10-30 Degrees C.
Humidity range: 0-95% non-condensing
Machine, assembled: 1.17x1.14x1.14m
Packaged machine: 80x66x70 cm
Net Weight:
PFM-9.0: 32kg
PFM-9.2: 35kg
Gross/Shipping Weight:
PFM-9.0: 68kg
PFM-9.2: 73kg

INTENDED USE:

• Pro-Cut on-car lathes are intended for resurfacing automotive and light truck disc brakes

made from steel or cast iron.

• They are intended to be used in an environment free of explosive gases, vapors

or dusts.

10 TECHNOLOGY DRIVE #4, W. LEBANON, NH 03784 USA P. 800.543.6618 / 603.298.5200 FAX. 603.298.8404 [email protected] WWW.PROCUTUSA.COM