Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 5)

IM CX1000-S33E 3
3. CP Operator Setting Example
A setting example of CP value control of loop 1 is as follows.
- Press “MENU” key and press soft key corresponding to “Control math setting”>
”PV/SP math…”.
Set the following items
- Loop number: 1 - PV/SP: PV, - Mode: On,
- Calculation expression: _SC(01.02.03), - PV range
Figure 1 _SC operator setting
Note
- In computation expression setting, there is no _SC01, _SC02. Please select _SC and input 01(02)
after _SC.