Yokogawa PR10 Retractable Assembly - Manual (Page 16)

16
IM 12B6K3-01E-E
Remarks:
• Turning the T-bar key can only be done
when the valve is closed.
• Pushing the probe into the process needs
a force to overcome the pressure of the
system and the friction of the dampening
rings in the fitting.
• The locking mechanism can be tightened
until the probe is firmly fixed in the
measuring position.
• The insertion stop can be fixed in
the actual insertion position. Refer to
paragraph 4.5
for adjusting the insertion depth.
FIG. 11 Probe insertion
FIXING
SCREW