Yokogawa BT200 - Manual (Page 37)

<5. USING THE BT200 FUNCTIONS >
5-7
IM 01C00A11-01E
(5) PRINTING UPLOADED OR DOWNLOADED
DATA
a) UPLOAD
UPLOAD
MODEL
EJ110-DM
UPLOAD normal end
F3:print data
PRNT ESC
F0508.EPS
UPLOAD
print UPLOAD data
LIST
TITLE
[ ]
DATE [ - - ]
TIME [ : ]
F3:start printing
FEED CAPS GO ESC
1. Panel appears following the
completion of an upload.
(refer to section 5.1(1))
Press [F3] PRNT to display
panel .
1
᭺
2
᭺
3
᭺
2. Type the title, date, and time,
and press [F3] GO to start
printing.
UPLOAD
UPLOAD data printing
please wait...
F4:STOP printing
STOP
3. The message “UPLOAD data
printing please wait...” is
displayed while the printing is
in progress.
Press [F4] STOP to cancel
printing.
The message “PRINTING
END” appears when the
printing is complete.
2
᭺
1
᭺
b) DOWNLOAD
following the end of a download, the downloaded
data can be printed out by following the proce-
dural steps similar to printing out uploaded data
explained in a) UPLOAD.
NOTE
Printing of uploaded or downloaded data is
executed while communicating with the con-
nected instrument. Unplugging the cable while
printing would cause a communication error to
occur, canceling communication.