AEG KO-LAVAMAT 88830 - Manual (Page 21)

Instructions for use
21
Change the spin speed/Select rinse hold
0 If necessary, select the spin speed for the
final spin.
Press the button SPIN SPEED (VITESSE
D´ESSORAGE) as often as is necessary
until the required spin speed appears in the display.
• 1800, 1400, 1200, 1000, 800, 600 or 400 revolutions per minute are
possible.
• With the display "0“ the washing remains in the last rinse, it is not
spun (Rinse hold.
3 If you do not change the spin speed, the final spin is automatically
adapted depending on the washing program:
The speed of the intermediate spin depends on the selected program
and cannot be changed.
Set the delay timer/soaking duration
Delay timer
The button DELAY TIMER (DEPART DIFFERE) allows the start of a wash-
ing program to be delayed by 1 or up to a maximum of 19 hours.
0 Press the DELAY TIMER (DEPART DIFFERE)
button as often as is necessary until the
required stard delay appears, for exam-
ple,12h for a delay of the program start
by 12 hours.
If 19h is displayed and you press again,
the run time of the washing program set appears (display in minutes,
e. g.125). In this state, the delay timer is not set.
– COTTONS/LINEN (BLANC/COULEURS) 1800 revolutions per minute
– EASY-CARES/EASY IRON
(MIXTES/SANS REPASSAGE)
1200 revolutions per minute
– DELICATES (LINGE DELICAT) 1200 revolutions per minute
– WOOLLENS (LAINE)/
P (Handwash)
1200 revolutions per minute
– SILK (SOIE)/
P (Handwash)
1200 revolutions per minute