Yokogawa FlowNavigator Software - Manual (Page 9)

9
IM 01C25R51-10E
NOTE
FlowNavigator works on following Device DTM.
Device DTM Name (EJX910 HART DTM)
Device DTM EJX Multivariable Transmitter
Name Model Name HART Protocol
Revision
Device Type Device Revision
EJX910 V1.1
EJX910A
EJX930A
5
EJX910
(0x0054)
1
EJX910 V2.1 EJX910
(0x0054)
2
EJX910 V2.1* 7 EJX910
(0x3754)
10
*: For EJX910A/EJX930A HART 7 model, “EJX910 V2.1” DTM is used for FlowNavigator.
NOTE
Use the device DTM “EJX910 V2.1” for EJX910A/EJX930A HART 7 model. “EJX910 V2.1” is a DTM which corresponds to
EJX910A/EJX930A HART 5 model (Device revision 2). Flow parameter configuration by FlowNavigator can be done by this
DTM.
NOTE
General parameter configuration for EJX910A/EJX930A HART 7 model (Device revision 10) can be done by “EJX910
HART7 DTM”. When starting FieldMate for EJX910A/EJX930A HART 7 model, “EJX910 HART7 DTM” is automatically
assigned by default. So when using FlowNavigator, select “EJX910 V2.1” DTM manually.