Pfister VTP-E11WE - Manual (Page 5)

EN
G
LI
SH
ENGLISH
17 17
17 TOILET SEAT COVER INSTALLATION
A. Insert Anchors (17A) into Rim Holes (17B). Insert Hinges (17C) into Seat Holes
(17D) as shown.
B. Place Rubber Washer (17E) and Hinges (17C) over Rim Holes (17B). Insert Fasteners
(17F) through Hinge Holes and screw loosely into Anchors (17A).
C. Adjust Seat (17H) to Toilet Bowl (17J). Secure Seat (17H) by tightening Fasteners
(17F).
D. Temporarily remove Seat (17H) by pressing Inner Buttons (17K) as shown.
E. Place Covers (17L) over Hinges (17C). Snap Seat (17H) into Hinge Posts (17M)
as shown.
MAINTENANCE & CARE
DISASSEMBLY:
1. Replacement parts may be available at the store where you purchased
your toilet.
2. When replacement parts are not available, please write or call Price Pfister
Consumer Service.
3. Always turn off water and relieve pressure before working on your
toilet.
CARE:
Cleaning Instructions:
Use only a soft damp cloth or sponge to clean and shine. Use mild detergent,
liquid dish washing soap or warm water for cleaning. Read the cleaner product
label before using. Use of polish, detergents, abrasive cleaners, organic
solvents or acid may cause damage. The use of in-tank cleaners or products
containing calcium hypochlorite can damage fittings in the tank. Use of other
than a soft damp cloth or sponge will nullify our warranty!
Special Trim:
Trim products which contain Porcelain, or other similar substance, are like
fine jewelry and should be cleaned with warm water. Installation of Said Trim
is at Users Risk!
5
17L
17L
17H
17C 17C
17M
17M
17H
17K
17K
17H
17F
17F
17J
17E
17B
17A
17B
17A
17C
17F 17F
17C
17E
17C
17C
17D
17D
17B
17B
17A
17A
A
D
E
B
C