ADTRAN Hub - Manual (Page 9)

introduction
61181012L1-5C 3
Controls
The 10Base-T Hub has nine front panel LEDs for power and port status, and a front panel
reset button. The reset button can be used without removing power.
Table 1 describes the LEDs and the reset button on the front panel).
Features
The basic features of the 10Base-T Hub include the following:
• Uses – 48 VDC; no power adapters required for Telco environment
• Supports eight 10Base-T Ethernet ports
• Provides a reset button on the front panel
• Provides front panel LEDs for power and port status
• Provides modular RJ-45 jacks for equipment connections
• Can be mounted on a wall, in a rack, or on a desk
• Complies with UL 60950 requirements
• Complies with NEBS Level 3
Table 1. Front Panel Description
Label Status Description
PWR {
z
Off
Green
No power to the unit
Power is present
PORTS
(1 – 8)
{
z
✷
Off
Green
Green Flashing
No Ethernet link
Normal operation
Data is being transferred
RESET N/A Resets the unit, without removing power