Asus M3A78-EM - Manual (Page 71)

ASUS M3A78-EM 2-19
LBA/Large.Mode.[Auto]
Enables or disables the LBA mode. Setting to [Auto] enables the LBA mode if the
device supports this mode, and if the device was not previously formatted with LBA
mode disabled.
Configuration options: [Disabled] [Auto]
Block.(Multi-sector.Transfer).M.[Auto]
Enables or disables data multi-sectors transfers. When set to [Auto], the data
transfer from and to the device occurs multiple sectors at a time if the device
supports multi-sector transfer feature. When set to [Disabled], the data transfer
from and to the device occurs one sector at a time.
Configuration options: [Disabled] [Auto]
PIO.Mode.[Auto]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA.Mode.[Auto]
Selects the DMA mode.
Configuration options: [Auto]
SMART.Monitoring.[Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit.Data.Transfer.[Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.6 SATA Configuration
The Storage Configuration menu allows you to configure your storage device(s).
Select an item then press to display the sub-menu.
BIOS SETUP UTILITY
Main
OnChip SATA Channel [Enabled]
OnChip SATA Type [SATA]
SATA IDE Combined Mode [Enabled]
Storage Configuration Options
Disabled
Enabled
OnChip.SATA.Channel.[Enabled]
Enables or disables OnChip SATA Channel.
Configuration options: [Disabled] [Enabled]