Asus M3A78-EM - Manual (Page 106)

A-4 Appendix
Using.the.onboard.graphics.card
1. Right-click on the Windows ® desktop, then click ATI.CATALYST(R).Control.
Center from the shortcut menu. The ATI CATALYST Control Center screen
appears.
2. Click.Graphics.Settings >
CrossFire™, then clear the
Enable.CrossFire™ check box.
When a confirmation message
pops up, click Yes. The screen
blacks out for about one minute.
3. Click OK.
4. Right-click on the Windows
® desktop, then click Personalize from the
shortcut menu.
5. Click Display.Settings. Select [Default.
Monitor].on.ATI.Radeon.HD.3200.
Graphics, then select the check boxes
of This.is.my.main.monitor and Extend.
the.desktop.onto.this.monitor. Click
OK, and then Yes from the confirmation
window.
6. Restart the system. Right-click on the Windows ® desktop, then click ATI.
CATALYST(R).Control.Center from the shortcut menu. The ATI CATALYST
Control Center screen appears.
7. Click.Graphics.Settings > CrossFire™, then select the Enable.
CrossFire™ check box. When a coonfirmation pops up, click Yes. The
screen blacks out for about one minute.
8. Click OK. The onboard graphics card is set to be the main monitor.
If you are using both an add-on and the on-board graphics cards at same time
and want to set the onboard graphics card as your main monitor, follow the
instructions on the next page.