Watlow MICRODIN - Manual (Page 18)

MicroDIN
Watlow Winona, Inc.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following product:
Designation: MicroDIN
Model Numbers: UD1A – 1CES – (Any four letters or numbers)
Classification: Temperature control, Installation Category II, Pollution degree 2
Rated Voltage: 24V‡ to 24V‡ (ac or dc)
Rated Frequency: 50 or 60 Hz
Rated Power Consumption: 5VA maximum
Meets the essential requirements of the following European Union Directives by using the relevant
standards show below to indicate compliance.
89/336/EEC Electromagnetic Compatibility Directive
EN 61326:1997 A1:1998 Electrical equipment for measurement, control and lab-
oratory use – EMC requirements (Industrial Immunity,
Class A Emissions).
EN 61000-4-2: 1996 With A1, 1998: Electrostatic Discharge Immunity
EN 61000-4-3: 1997: Radiated Field Immunity
EN 61000-4-4: 1995: Electrical Fast-Transient / Burst Immunity
EN 61000-4-5: 1995 With A1, 1996: Surge Immunity
EN 61000-4-6: 1996: Conducted Immunity
EN 61000-4-11: 1994: Voltage Dips, Short Interruptions and Voltage Variations
Immunity
EN 61000-3-2: 1995 With A1-3:1999: Harmonic Current Emissions
EN 61000-3-3: 1995
With A1:1998: Voltage Fluctuations and Flicker
73/23/EEC Low-Voltage Directive
EN 61010-1: 1993 With A1:1995: Safety Requirements of electrical equipment for mea-
surement, control and laboratory use. Part 1: General
requirements
Raymond D. Feller III Winona, Minnesota, USA
Name of Authorized Representative Place of Issue
General Manager January 2003
Title of Authorized Representative Date of Issue
Signature of Authorized Representative
(2348)
Declaration of Conformity
18
Watlow MicroDIN Quick Start Guide