Atlantis Land 10/100Mbps - Manual (Page 27)

21
(3) QoS
If some ports need to have the priority to manage the data
transfer, QoS should be change. QoS has two
functions to alter, High and Low. The default
settings of all ports’ QoS are High. To change the
QoS setting, highlight Port and enter the port
number to select the desired port. The default
settings of QoS are High. Set QoS to determine
which ports will always transfer their data first.
(4) Link Status
This value is automatically determined by the Switch and can’t
be changed. If there is a valid connection to the
Switch through that assigned port, the Link Status
will show the connecting speed. The status will be
Down if there is no connection through that port.
VLAN (Virtual Local Area Network)
Group individual ports into a small “virtual” network of their
own to be independent of the other ports.
Changing the VLAN, locate the port that needed
to set, select the “V” for joining the VLAN group
and the “-” for not joining. The default setting of
VLAN is shown as Figure 14.