Atlantis Land 10/100Mbps - Manual (Page 26)

20
Figure 13. Port Configuration
(1) Speed
There are five modes— Auto, 100M Full, 100M Half, 10M Full,
and 10M Half—for speed selections. To change
the speed setting, highlight Port and enter the port
number to select the desired port, next highlight
Speed, click Enter, and use Space Bar to toggle
back and forth between the five different options.
(2) Flow Control
This setting determines whether or not the Switch will be
handling flow control. To change the flow control
setting, highlight Port and enter the port number
to select the desired port. Set FlowCtrl to ON for
avoiding data transfer overflow. Or it sets to OFF,
there is either no flow control or other
hardware/software management.