Atlantis Land 10/100Mbps - Manual (Page 23)

17
Login
First execute the terminal emulation program on the remote
workstation, and turn on the Switch. When login
to the Switch, the following screen (Figure 10)
prompt:
Password:
Figure 10. Login
Input the password in the blank, and then press Enter to login
Main Menu. If you manage the Switch for the
first time, you should input the factory default
password “admin” to login to the Switch. For
changing the password, first highlight System＞
Change Password to input your new password,
and then highlight Confirm Password to input
your new password again to ascertain it.