Watlow E-Safe Hybrid Relay Rev B - Manual (Page 3)

ç
∫
WARNING:
Wiring must conform
to National Electric
Code (NEC) safety
standards, as well as
locally applicable
codes. Failure to do
so could result in per-
sonal injury or death.
∫
W A R N I N G :
Only authorized and
qualified personnel
should install and
service the E-SAFE
relay. Failure to
comply with these
r e c o m m e n d a t i o n s
may result in damage
to equipment and
property and injury to
p e r s o n n e l .
System Wiring Example
Input and Output Wiring
Torque Guidelines :
• Properly torgued line & load terminals to 3.95 nm (35 in-lbs)
• Retorque after 48 hours to minimize wire cold flow.
• Re-torque line & load terminals every 36 months.