APC UCCS Temperature Control - Manual

JANUARY 2008 UCCS STANDARDS 15950-1
UCCS Temperature Control Specifiers Guide
Mechanical Division 15950: Basic Control Materials and Methods
I. Part 1 - General
1.01 Special Conditions
1.02 Scope
1.03 Related Work Specified Elsewhere
1.04 Work Included
1.05 Definitions
1.06 Drawing and Specifications
1.07 Submittal Data and Shop Drawings
1.08 Project Record Documents
1.09 Demonstration and Training
1.10 Warranty
1.11 Quality Assurance
1.12 Ownership of Proprietary Material
II. Part 2 - Products
2.01 Manufacturers
2.02 Air Tubing and Control Wiring
2.03 Control Valves
2.04 Control Dampers
2.05 Local Control Panels
2.06 Compressed Air Supply - Pneumatic
2.07 Actuators and Positioners - Pneumatic
2.08 Auxiliary Devices - Pneumatic
2.09 Control Devices - Electric
2.10 Solid-State Sensing Devices
2.11 Transmitters - Solid State
2.12 Auxiliary Devices - Electric
2.13 Actuators and Positioners - Electric
2.14 Safety Controls
III. Part 3 - Execution
3.01 Control-Air Piping
3.02 Control Piping (Liquids)
3.03 Control Wiring
3.04 Delta Controllers
3.05 Installation and Setup Requirements
3.06 Control Device Locations
3.07 Control Panels
3.08 Identification
3.09 Protection
3.10 Cleanup
3.11 Testing
3.12 Control Execution - General
3.13 Workstation Programming
3.14 Fiber Optics - Networking
3.15 I/O Point Wiring Convention
3.16 DDC Software
IV. Part 4 – Special Instructions
Index
END OF SECTION