Wiegmann WPG Series - Manual (Page 37)

K37
SERIES 1803
F E AT U R E S - S P E C I F I C AT I O N S
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
E N V I R O N M E N TA L C O N T R O L S
1 8 0 0 S E R I E S - F I LT E R FA N S / E X H A U S T F I LT E R & M AT S
SERIES 1800, 1801, 1802
Industry standards
IP54
IP55 (with fine filter mat)
UR Recognized component
Application
• The latest passive technology for
fan cooling and pressurizing of
industrial enclosures
• Filtered passive ventilation can be
provided by an exhaust filter for
either convection cooling or in
combination with a fan in forced
air cooling
Features
• All four models are available in 120
and 230 volt with an expected ser-
vice life of 50,000 hours
• Self-adhesive seal on mounting
frame prevents dust and water from
entering the enclosure
• The functional design of the intake
exhaust fan hoods minimize direct
infiltration of falling water
• By simply turning the axial fan, the
direction of the airflow can be
changed by 180 degrees
• Air Channeling makes the filter fan
particularly quiet in operation
• Plastic self-extinguishing UL94-V0
and temperature resistant –31˚F to
158˚F
• Durable, reusable medium filter mat
included
• RAL7035 Light Gray Finish
• Ball Bearing Axial Fan with plastic
impeller UL94V-01. 2 lead wires
4" long (pressure clamps inclusive)
Time-Saving Steps
1800 Series Fans can be easily con-
nected and installed from the outside
of the cabinet.
1. Remove protective film from the
sealing strips provided on the
mounting frame
2. Insert mounting frame into enclo-
sure cutout.
3. Terminate the axial fan with push
type connectors and slide the unit
into the mounting frame.
4. Insert the Filter Mat and snap on
the protective Hood.
Time-Saving Assembly and Maintenance