Conversion kit, Referenced standards, Applicable requirements – Ross Controls EXPLOSION-PROOF VALVES SERIES 27 User Manual
Page 4
Printed in the U.S.A. – Rev. 10/12
© 2012 ROSS CONTROLS
®
. All Rights Reserved. Form NPS035
WARRANTY and CAUTIONS
Standard ROSS warranty and cautions apply, available upon request or at
www.rosscontrols.com
ROSS EUROPA GmbH
Germany
Fax: 49-6103-74694
ROSS ASIA
®
K.K.
Japan
Fax: 81-427-78-7256
ROSS UK Ltd.
United Kingdom
Fax: 44-121-559-5309
ROSS SOUTH AMERICA Ltda.
Brazil
Fax: 55-11-4335-3888
ROSS CONTROLS
®
INDIA Pvt. Ltd.
India
Fax: 91-44-2625-8730
DIMAFLUID s.a.s.
France
Fax: 33-01-4945-6530
ROSS CONTROLS
(CHINA) Ltd.
China
Fax: 86-21-6915-7960
ROSS CONTROLS
®
U.S.A.
Customer Svs. 1-800-GET-ROSS
Technical Svs. 1-888-TEK-ROSS
www.rosscontrols.com
Referenced Standards
All standards are subject to revision. Parties are encouraged to investigate and apply the most recent editions of the standards indicated below.
Various Safety-related Standards that Apply to Air Systems:
ANSI/ASSE Z244.1-2003 (R2008) –
Lockout/Tagout Control of Hazardous Energy
OSHA 29 CFR 1910.147, ANSI B11.0-2010, RIA 15.06, ISO13849 –
Machine Safeguarding
ANSI/PMMI B155.1-2010 –
Safety Requirements for Packaging Machinery
ANSI B11.1 –
Safety Requirements for Mechanical Power Presses
ANSI B11.2 –
Safety Requirements for Hydraulic Power Presses
ANSI B11.3 –
Safety Requirements for Power Press Brakes
ANSI B11.19-2010 –
Performance Requirements for Safeguarding (Stop Time)
ANSI B11.TR6-2010 –
Safety Control Systems for Machine Tools
OSHA 29 CFR 1910.211-219 –
Safeguarding Mechanical Power Presses
Conversion Kit
ROSS Controls standard poppet solenoid pilot controlled valves for line
mounting can be easily field-converted into an explosion-proof solenoid
pilot poppet valve.
Listed on the right are the conversion kit part numbers to replace the
obsolete ROSS explosion proof pilot, or to convert a standard in-line valve
to an explosion-proof valve.
Applicable Requirements
C22.2 No. 0-10 - General Requirements - Canadian Electrical Code, Part II
CSA C22.2 No. 25-1966 - Enclosures for use in Class II Groups E, F and G Hazardous Locations
CSA C22.2 No. 142-M1987 - Process Control Equipment
C22.2 No. 213-M1987 - Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations
CAN/CSA E79-0-95 - Electrical apparatus for explosive atmospheres, Part 0: General requirements
CAN/CSA E79-18-95 - Electrical apparatus for explosive atmospheres, Part 18: Encapsulation "m"
Part Number
1/4" - 1" OT (Overtap) 2370K77W
1" - 2
1/2"
2371K77W