Ross Controls COALESCING FILTERS - Manual (Page 4)

18 © 2012, ROSS CONTROLS.
All Rights Reserved.
0 15 scfm
FLOW
l/s 0
30
15 30 45 60 75
1
2
3
4
psi
5
PRESSURE DROP
0.07
0.14
0.21
0.28
bar
0.35
150(10.3) 92(6.3) 36(2.5)
STANDARD 0.3- µ m ELEMENT
Inlet Pressure psig (bar)
0
0 0
1/4 Ports
45 60 75 90 105 120 135150 165
H
H H
H designates models with extended bowls.
1
2
3
4
psi
5
PRESSURE DROP
0.07
0.14
0.21
0.28
bar
0.35
0 0
H
H
H
1
2
3
4
psi
5
0.07
0.14
0.21
0.28
bar
0.35
0 0
1/2 Ports
H H H
PRESSURE DROP
3/8 Ports
FLOW CHARTS
FULL-SIZE Coalescing Filters
FEATURES:
• Modular or inline mounting
• 0.3-micron rated coalescing filter element
; optional 0.01-micron rated filter element
• Differential pressure gauge
• High-strength polycarbonate plastic filter bowl with steel shatterguard;
optional metal bowl with clear nylon sight glass
• Optional extended bowl with higher flow filter element
• Manual drain; optional internal automatic drain
APPLICATION NOTE:
A general purpose filter must be installed ahead of a coalescing filter to ensure good
performance and to extend the life of the coalescing element.
Ports: 1/4, 3/8, 1/2
Flow to 100 scfm
A
B
C
Standard
Bowl
A
B
C
Extended
Bowl
1/4 70 (33.0) 5031B2108 5032B2118 5031B2008 5032B2018
3/8 70 (33.0) 5031B3108 5032B3118 5031B3008 5032B3018
1/2 80 (37.7) 5031B4108 5032B4118 5031B4008 5032B4018
1/2 77 (36.3) 5031B4128* 5032B4128* 5031B4028* 5032B4028*
*Models with extended bowl.
Port Air Flow Automatic Drain Models Manual Drain Models
Size scfm (l/s) Plastic Bowl Metal Bowl Plastic Bowl Metal Bowl
Small
Slide Gauge
R-K103-151
Large Dual
Face Gauge
R-106-35
DIFFERENTIAL PRESSURE GAUGES
Large Dual Face Gauge
with Reed Switch
R-106-35E (Normally Open)
R-106-35EC (Normally Closed)
STANDARD SPECIFICATIONS (for products on this page):
Ambient/Media Temperature:
Polycarbonate plastic bowl: 40° to 125°F (4° to 52°C).
Metal bowl: 40° to 175°F (4° to 79°C).
Body: Zinc.
Bowl: 8-ounce (240-ml) capacity polycarbonate plastic with steel
shatterguard; optional zinc bowl with clear nylon sight glass. Optional
20-ounce (600-ml) extended polycarbonate or zinc bowl has higher
flow filter element.
Bowl Drain: Manual; optional internal automatic drain only on
extended aluminum bowl. For optional internal flow drain (on
polycarbonate plastic bowl only), consult ROSS.
Bowl Ring: Aluminum.
Differential Pressure Gauge: Small Slide Gauge R-K103-151
standard; optional Large Dual Face Gauges, consult ROSS. Filter Element: 0.3-micron rated borosilicate-glass-fiber coalescing
element; optional 0.01-micron rated element. For 0.01-micron filter
element replace the seventh digit from the model number with a “2”,
e.g., 5031B2208.
Fluid Media: Compressed air.
Inlet Pressure:
For automatic drain model:
With polycarbonate plastic bowl: 15 to 150 psig (1.0 to 10.3 bar).
With metal bowl: 15 to 200 psig (1.0 to 13.8 bar).
For manual drain model:
With polycarbonate plastic bowl: 0 to 150 psig (0 to 10.3 bar).
With metal bowl: 0 to 200 psig (0 to 13.8 bar).
Seals: Nitrile.
Threads: NPT standard, BSPP. For BSPP threads, add a “C” prefix
to the model number, e.g., C5031B2108.
Bowl DIMENSIONS inches (mm) Weight
Type A B C Depth lb (kg)
Standard 3.5 (89) 5.8 (146) 1.8 (45) 3.5 (89) 2.13 (0.95)
Extended 3.5 (89) 10.3 (260) 1.8 (45) 3.5 (89) 3.25 (1.54)
REPLACEMENT FILTER ELEMENT KITS
Bowl Type Element Rating/Type Kit Number
Standard 0.3-µm - Standard 947K77
Extended 0.3-µm - Standard R-A103-133L
Standard 0.01-µm - Optional 948K77
Extended 0.01-µm - Optional R-A103-133LE8
IMPORTANT NOTE: Please read carefully and thoroughly all of the CAUTIONS on the inside back cover.
Manual Drain Automatic Drain
ISO Symbols
Filter