Reelcraft Hose Reel Trailer User Manual
Page 7
Hose Reel Trailer
www.reelcraft.com
Page 7
Application:
The 600811 switch box performs the power on/off switching function to the reel motor. The 600811 is used for 12 volt applications and
contains the required power relay and a 25 amp circuit breaker.
Mounting:
Remove the nuts and lockwashers from the mounting studs
and use these lockwashers and nuts to secure the box to your
mounting site. Recommended mounting hole drill size in your
mounting site should be a minimum of 9/32” and no greater
than 5/16.”
Operation:
Push Button - Normally off/momentary on switch. Pushing this switch will apply power to the motor.
Circuit Breaker - Push button manual reset. Protects the switch, motor, and battery from any over current conditions caused by
the white wire or the motor.
Wiring Instructions: