Reelcraft Hose Reel Trailer - Manual (Page 5)

Hose Reel Trailer
www.reelcraft.com Page 5
Step 6:
Attach the axle brackets and axle stabilizers to the
axle as shown in figure 9. Use the supplied 3/8”
diameter by 2½” long bolts, 3/8” washers, and 3/8”
lock nuts. Do not completely tighten the fasteners
until after step 7.
Step 7:
Place the trailer frame topside down on a clean, flat
surface. Place the axle and brackets onto the trailer
frame as shown in figure 10. Attach the axle
brackets and axle stabilizers to the trailer frame with
the supplied 3/8-16 x 2½” hex head bolts, 3/8”
washers, and 3/8” lock nuts. Tighten all fasten-
ers, including those on the axle. Attach the wheels
as shown in figure 11. Use the supplied lug nuts;
tighten to 50ft-lbs torque. Do not overtighten.
Step 8:
Attach the trailer tongue as shown in figure 12. Use
the supplied 3/8” diameter by 3½” long carriage
bolts, 3/8” washers, and 3/8” lock nuts. Turn the
trailer over to continue the assembly.
Step 9:
Attach the hose reel to the trailer as shown in figure
13. Use the supplied 5/16” diameter by 3/4” bolts,
5/16” washers, and 5/16” lock nuts. Tighten all
fasteners securely. Trailers with hand crank reels
are now complete, and ready to use. For motorized
reels, continue to step 10.
Figure 10
Figure 11
Figure 12
Figure 9