Reelcraft Series 30000 Air Motor Driven Reels - Manual

Personal injury and/or equipment
damage may result if proper safety
precautions are not observed.
• Ensure that the reel has been properly
installed before connecting supply line
(see installation instructions).
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line
ensure that supply line pressure does
not exceed maximum rated working
pressure of reel.
• Do not play pranks on other personnel.
Even low pressure is very dangerous
and can cause irrepairable damage or
death.
• Do not wear loose fitting clothing while
operating reel.
• Be aware of other personnel in work
area.
• Be aware of other machinery in work
area.
• If a leak occurs in the hose or reel,
remove supply line pressure
immediately.
• If the reel is power driven check for
loose, frayed, and/or broken wires before
operating.
• Treat and respect a hose reel as any
other piece of machinery, observing all
common safety practices.
Operating Instructions
Series 30000 Air Motor Driven Reels
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 534-89C Rev: 5/2013
AA32106 L4A AA32112 M4A AA33112 L4A AA33118 L4A
AA32112 L4A AA33106 L4A AA33112 L6A AA33118 L6A
Dimensional Data
Part # B C D
AA32106 L4A 6” 17 1/4” 9 3/4”
AA32112 L4A 12” 23 1/4” 15 3/4”
AA32112 M4A 12” 23 1/4” 15 3/4”
AA33106 L4A 6” 17 1/4” 9 3/4”
AA33112 L4A 12” 23 1/4” 15 3/4”
AA33112 L6A 12” 23 1/4” 15 3/4”
AA33118 L4A 18” 29 5/8” 21 3/4”
AA33118 L6A 18” 29 5/8” 21 3/4”
Safety Precautions