Reelcraft Series LPD80000 Spring Driven Hose Reels (LPDxxxxxOLP) - Manual

Personal injury and/or equipment damage
may result if proper safety precautions are
not observed.
• Ensure that reel is properly installed
before connecting input and output
hoses.
• Bleed fluid/gas pressure from system
before servicing reel.
• Before connecting reel to supply line,
ensure that pressure does not exceed
maximum working pressure rating of
reel.
• Remember, even low pressure is very
dangerous and can cause personal in-
jury or death.
• Be aware of machinery and personnel
in work area.
• If a leak occurs in the hose or reel, re-
move system pressure immediately.
• A high tension spring assembly is con-
tained within the reel. Exercise extreme
caution.
• Pull hose from reel by grasping the
hose itself, not the control valve.
• If reel ceases to unwind or rewind,
remove system pressure immediately.
Do not pull or jerk on hose!
• Treat and respect the hose reel as any
other piece of machinery, observing all
common safety practices.
Operating Instructions
Series LP80000 / LPD80000
Spring Driven Hose Reels
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com
Form# 1161-1004 Rev: 5/2013
LP82000 OLP LP83000 OLP
LPD83000 OLP LPD84000 OLP
Dimensional Data
Personal Safety
IMPORTANT
Read this manual carefully before installing,
operating or servicing this equipment.
Part # A B C D E F
LP82000 OLP 25.375” 24” 10 6” 15.375” 9.375”
LP83000 OLP 25.375” 24” 10 6” 15.375” 9.375”
LPD83000 OLP 25.375” 24” 10.5” 7.875” 17.75” 9.375”
LPD84000 OLP 25.375” 24” 10.5” 7.875” 17.75” 9.375”
A
B
C
D
E
F