Rapid-Air SERVO FEED WITH TRANSTERM: C, S, X, HT SERIES - Manual (Page 3)

2
TABLE OF CONTENTS
CHARTS AND DRAWINGS DIRECTORY pg. 3
INTRODUCTION pg. 4
INSTALLATION AND MECHANICAL SETUP pg. 5
INSTALLATION OF MOUNTING BRACKET pg. 6
MECHANICAL ROLL RELEASE SETUP pg. 7
ELECTRICAL CABLES AND AIR LINE pg. 8
INTERFACING FEED WITH PRESS pg. 9
PRETEST WRITE UP pg. 10
LOADING MATERIAL pg. 11
SERVO INTERFACING EXPLANATION pg. 12-13
RESET JOB PARAMETERS pg. 14
PROGRAM NUMBER DISPLAY pg. 15
PROGRAMMING PROCEDURE pg. 17
DRIVE ROLL PARALLELISM ADJ. pg. 23
TROUBLESHOOTING pg. 24
FAULT DISPLAY - FAULT CODE pg. 26-27
OPERATIONAL MAINTENANCE PROCEDURES pg. 28
PRECAUTIONS AND SAFETY pg. 30
WARRANTY pg. 31