Ramsey Winch HD-234 (JERR-DAN) (NOT CURRENT) - Manual (Page 9)

1. Drain oil from gear housing
by removing (item #36) plug
from bottom of gear housing.
Remove plug (Item #35)
from top of gear housing.
Remove adapter rod (item
#26) by driving pin (item
#37) from shifter shaft of
winch. Remove mounting
frame (item #1) from winch
by removing hardware shown.
2. Remove clutch housing (item #9) and
clutch (item #5) from winch assembly.
Remove two keys (item #31) from key-
ways. A screwdriver can be used, at
notch, to aid in the removal of keys.
Once keys have been removed, drum
(item #7) and thrust washer (item
#46) can be removed from drum shaft.
INSTRUCTIONS FOR OVERHAUL OF RAMSEY
MODEL HD-234 RAM-LOK®
DIS-ASSEMBLY
9