Ramsey Winch STERLING BULLIT 4500/5500 - Manual (Page 3)

STEP 2
2
3. Install side plates (Item #1) by attaching side
plate to upper mounting bracket using (2) 1/2 NC
x 1-1/2” Bolt (Item #11)with lock washer (Item
#18) and nut (Item #14) (each side) (Figure 3).
Do Not Tighten
.
FIGURE 3
4. Install mounting channel (Item # 6) between
lower brackets and side plates using (3) ½ NC x
2” bolts (Item #10) with lock washers (Item #18)
and nuts(Item #14). (each side)(Figure 4) Do
Not Tighten
.
FIGURE 4
5. Install grill tube (Item #7) between side plates
with (1) 3/8 NC x 1” bolt (Item #8).(each side)
(Figure 5)
FIGURE 5