Ramsey Winch STERLING BULLIT 4500/5500 - Manual (Page 2)

STEP 1
1
1. Install lower mounting brackets (Item #2
left side & #3 right side) by inserting
bracket through tow hook opening and
attaching with (2) 5/8 NC x 2” bolt (Item
#12) with lock washer (Item #19) and nut
(Item #15) (each side) (Figure 1). Do Not
Tighten!
FIGURE
1
2. Install upper mounting brackets (Item #4
Left side & #5 Right side) using (4) 7/16 NC x
1 ½ bolts (Item #9) with flat washers front and
rear (Item #17), lock washers (Item #16), and
nuts (Item #13) (each side) (Figure 2). Do Not
Tighten.
FIGURE 2