Ramsey Winch JEEP GRILL GUARD/SPORT BAR KITS 295241 & 251062 - Manual (Page 5)

4
Step 4 - Mounting Winch to Mounting Plate
1. Refer to diagram above for reference.
2. 3" high spacers are required to support winch assembly.
3. Place Mounting Plate with winch on spacers to allow access to mounting holes for assembly.
4. Place four (4) flat washers and nuts into pockets on Winch legs.
5. Loosely attach winch to mounting plate with four (4) 3/8-16NCx1-1/4 capscrews with lockwashers
(furnished with winch) using front winch legs and 1 rear leg.
6. Route ground wire under grille avoiding brake lines and sharp edges (tie wrap in place)
7. Tighten all connections to proper torque (see chart on page 2).
8. If mounting a REP 6000/8000/9000 winch go to step 5.
If mounting a Patriot winch carefully remove spacers and set winch assembly on bumper.