Ramsey Winch FORD SPORT BAR KIT 295363 - Manual (Page 4)

1. Position mounting channel between
the two frame mounting brackets
2. Secure using (2) 3/8” X 1-1/4”
carriage bolts, with 3/8” lockwasher
and nut each side. Tighten securely.
(See torque value chart below).
3. Refer to winch owner’s manual for
mounting instructions.
Install Mounting Channel
1. Place splashguard in position and
replace the (2) factory supplied
metric bolts each side.
2. Replace (3) metric bolts across the
front.
3. Replace plastic fastener (1) each
side.
Reinstalling the Splashguard
Parts List
1 1 204260 License Mounting Bracket
2 1 395357 Winch Mounting Channel
3 2 414048 Hex Head Bolt-1/4-20NCX3/4 Lg
4 4 414221 Carriage Bolt-3/8-16NCX1 1/4 Lg
5 4 415313 Capscrew M12X1.75X55MM Lg
6 2 418020 Hex Nut-1/4-20NC, F/B
7 4 418033 Hex Nut-3/8-16NC, F/B
8 2 418147 Lockwasher-1/4 Med Sect.
9 2 418158 Washer-1/4,SAE Flat, F/B
10 4 418175 Lockwasher-3/8 Med Sect,
11 4 418218 Lockwasher-1/2 ID Med Sect
12 4 418221 Washer-1/2 SAE Flat
13 2 440138 Cable Ties
14 1 474200 Frame Mounting Bracket - LH
15 1 474201 Frame Mounting Bracket - RH
16 1 690504 Loom
Torque Value Chart
1/4-20
5 ft-lbs 7 Nm
3/8-16 34 ft-lbs 46 Nm
1/2-13 87 ft-lbs 118 Nm
12 mm 39 ft-lbs 53 Nm
OM-913361-0101-A
3