Ramsey Winch FORD SPORT BAR KIT 295363 - Manual (Page 3)

1. Remove and discard the (2) factory
tow hook bolts from the tow hooks
on each side.
2. Remove tow hooks and set aside.
Removing the Tow Hooks
1. Slide the frame mounting bracket
through the tow hook access in the
air dam.
2. Install new 12mm x 1.75 bolt through
rear hole. Secure with 1/2” lockwash-
er and 1/2” flat washer. Tighten 2-3
turns only.
3. Repeat for other side.
Installing the Frame Mounting Brackets
1. Slide the tow hooks through the tow
hook access in the air dam.
2. Slide slot in tow hook over the rear
12mm bolt and position as shown.
3. Install new front tow hook bolt
(12mm x 1.75). Secure with 1/2”
lockwasher and 1/2” flat washer.
Tighten all bolts securely. (See torque
value chart on page 3).
4. Repeat for other side.
Reinstalling the Tow Hooks
2