Ramsey Winch FORD GRILL GUARD/WRAPAROUND KITS 295946 & 295947 - Manual (Page 4)

4c. Insert 1/2” bolt with extension through hole in bottom of
frame and position it so that threads extend out of frame
through slotted hole near top of frame.
Use rod extension to maneuver bolt. Bolt threads should
extend out of frame rail as shown at lower right.
4d. With bolt in place, insert upper support bracket (item
#8) on top of frame so that small tab extends out past
vehicle grille and large tab with slotted hole rests over
threads.
4e. Fasten upper support bracket to frame rail using 1/2”
flat washer (item #18) and locknut (item #16). Tighten
until snug.
4f. Repeat for passenger side.
4