Ramsey Winch FORD GRILL GUARD/WRAPAROUND KITS 295944 & 295945 - Manual (Page 2)

FOR ALL VEHICLES WITHOUT FRONT TOW HOOKS, START
ON THIS PAGE.
FOR ALL VEHICLES EQUIPPED WITH FRONT TOW HOOKS,
START ON FOLLOWING PAGE.
Cut 2 L-shaped slots 4” x 3” 28-1/4” apart, centered on the
vehicle (in the bumper cavities), as shown at right. The right
and left lower mounting brackets will need to be inserted
through these slots, so use the lower mounts as guides to cut
slots.
Insert (2 per side) 7/16 bolts with extension rods (item #9)
through holes in frame rail so that bolts come through bottom
of frame rail, as shown at right. Once bolts extend through
bottom of frame rail, fasten lower mounting bracket (item #3)
using (2 per side) 7/16 flat washers (item #14) and (2 per
side) 7/16 lock nuts (item #15). Do not tighten until later.
Do the same on the right side of vehicle.
Continue with installation on Page 4.
2
FRAME RAIL