Ramsey Winch FORD GRILL GUARD KIT 295919 - Manual (Page 3)

KI-913351-0301-C 2
STEP 2
Secure lowest end of side plate assembly (item #3) to outside of lower R.H. & L.H. brackets (item #8
& #9). Use (1) 3/8-16NC x 1-1/4 lg. hx.hd. capscrew (item #11) and nut (item #14), each side. DO
NOT TIGHTEN HARDWARE COMPLETELY. Pivot side plate assembly forward and place channel
(item #2), from behind side plate assembly, into place between R.H. and L.H. lower bracket
assemblies.
Pivot side plate assembly back into upright position. Place lower shims (item #19) between lower
brackets and side plates. Place shims (item #20) between ends of channel and lower brackets.
Align mounting holes at ends of channel with holes in side plates, shims and lower bracket
assemblies. Use (2) 3/8-16NC x 1-1/4 lg. capscrews (item #11) and nuts (item #14), each side, to
secure side plate assembly and shim to channel and lower bracket assemblies, as shown.
Use (1) 1/2-13NC x 1-1/4 lg. hx.hd. capscrew (item #12) with 1/2" nut (item #15), each side, to
secure R.H. and L.H. strap assemblies (item #4 and #5) and upper shim (item #18) to inside of side
plate assembly (item #3).
Squarely align kit with front of vehicle. TIGHTEN ALL HARDWARE TO PROPER TORQUE VALUE
(See Torque Value Chart, page 4).