Ramsey Winch FORD GRILL GUARD KIT 295919 - Manual (Page 2)

KI-913351-0301-C 1
STEP 1
Remove vehicle license plate mounting bracket from vehicle bumper. This will allow more room to
access through opening in bumper for attaching kit brackets.
Remove vehicle tow hooks from bottom of vehicle frame. Attach lower R.H. and L.H. bracket
assemblies (item #8 & #9) to bottom of vehicle frame with tow hooks using existing vehicle tow hook
mounting hardware, as shown. DO NOT TIGHTEN HARDWARE COMPLETELY.
Remove vehicle bumper mounting hardware from R.H. side and place middle R.H. bracket assembly
(item #6) through opening in bumper and over bumper mounting studs. Secure to frame using
vehicle bumper mounting hardware. Repeat on L.H. side of bumper using middle L.H. bracket
assembly (item #7). DO NOT TIGHTEN HARDWARE COMPLETELY.
Place R. H. and L.H. upper strap assemblies (item #4 & #5) over top of bumper and attach to top of
middle bracket assemblies, as shown below. Use (2) 3/8-16NC x 1-1/4 lg. capscrews (item #11) and
nuts (item #14), each side. DO NOT TIGHTEN HARDWARE COMPLETELY.