Ramsey Winch FORD GRILL GUARD KIT 295374 (PAT 12/15) - Manual (Page 3)

7. Place Channel Assembly (Item #6) between mounting
bracket assemblies. Use (3 each side) 1/2-13NC x 1.25
capscrews (Item #10), lockwashers (Item #13), and
nuts (Item #12) to attach channel to mounting bracket
assemblies.
8. Install Grille Tube (Item #5) between the mounting brack-
ets, placing shims (Item #16) between mounting brack-
ets and ends of tube. Use (2) 3/8-16NC X 1.0 capscrews
(Item #7).
9. Align channel and mounting brackets and tighten front
hardware to proper torque values before tightening back
hardware (see Torque Value Chart on following page).
3