Ramsey Winch FORD GRILL GUARD KIT 295340 - Manual (Page 2)

STEP 1
1
Figure 3
1. Unfasten plastic splashguard from radiator support bracket. Loosen, but do not remove, the two
bolts on the arms of the bumper support bracket as shown in Figure 1. Remove the bolt attached
to the vehicle frame. Repeat for other side of vehicle. Remove tow hooks and vehicle bumper.
Remove and discard shims hanging from front of vehicle frame, if so equipped.
2. Next remove the two bolts on the left side of the blocker bar as shown in Figure 2. Remove the
three nuts on the underside of the blocker bar as shown in Figure 3. Repeat for other side of
vehicle and remove blocker bar.
On some models, to remove the blocker bar, remove the four bolts that hold the blocker bar to the
bracket as shown in Figure 3a.
Figure 1 Figure 2
Figure 3a