Ramsey Winch DODGE GRILL GUARD KIT 295930 - Manual (Page 3)

3. Use (2) 7/16 x 5” capscrews (Item #9), (2) locknuts (Item
#14) and (4) flat washers (Item #17) to install lower
mounting bracket (Item #3). Use lower bracket gasket
(Item #21). They should be installed in the order shown
below.
To mount the Upper Mounting Bracket (Item #5), remove
the nut from the Bumper Bracket bolt of the vehicle. Slide
the Upper Mounting Bracket and gasket (item #22) onto
the Bumper Bracket bolt and tighten the nut back on.
It is a good idea to install the mounting bracket assembly
entirely on one side, then start on the other. Install bolts
loosely—do not tighten until told to do so.
4. Install (1) 1/2 x 7-1/2” capscrew (Item #11), (1) lower
mount backing plate (Item #19), (2) flat washers (Item
#18), and (1) locknut (Item #15) to frame and lower
mounting bracket (Item #4).
5. Repeat steps 2 through 4 for right side.
3
Bumper
Upper Mounting
Bracket
Lower Mounting
Bracket
Frame
Bolt
Locknut
Gasket
Lower Mounting Bracket
Washers
Bumper Bracket
(under Bumper)
Frame
Capscrew
Backing Plate