Ramsey Winch CHEVY WRAPAROUND KIT 295932 - Manual (Page 5)

4
Step 7
Mount center unit on vehicle and secure each side at the lower support bracket using (3) 1/2 X 1-1/4"
capscrews #19 with (3) 1/2" nuts #22 (Figure 16). Attach each side of center unit to upper support
bracket using (1) 3/8-16NC x 1-1/4 capscrew #18 with nut #21 (Figure 17). Do not tighten hardware.
Step 8
Remove the two nuts #20 that secure the headlight grille to the L.H. wraparound #4. It is not
necessary to remove the capscrews (Figure 19).
Step 9
Note: You will need assistance for this step.
Remove the (3) 3/8-16NC x 1-1/4 capscrews #18 from L.H. side of
center unit where the side plate attaches to the upper support
bracket and the channel (Figure 18).
Have someone position wrap shim #31 between the side plate and
left wraparound #4.
Figure 16 Figure 17
Figure 18