Ramsey Winch CHEVY WRAPAROUND KIT 295362 (RE WINCH) - Manual (Page 4)

KI-913358-0200-A 3
Figure 7
Step 7
Install upper tube assembly #3 between side plates #1.
Insert (1) shim #26 between tube and side plate at each
end. Secure using (1) 3/8-16NC x 3/4” hex socket button
head capscrew #15 through side plate and into threaded
hole in each end of tube (Figure 6). Repeat for other tube.
TIGHTEN ALL HARDWARE COMPLETELY. Start at the upper
tube assembly and work down to the lower bracket
assemblies tightening all hardware to the appropriate torque
value. (See Torque Value Chart on page 5).
Step 8
Attach left-hand light tube assembly #6 to left-hand side
plate #1 (Figure 7). Insert (2) 3/8-16 NC x 1” plated carriage
bolts #7 through light tube assembly and into side plate as
shown. Secure using (2) lockwashers #19 and (2) nuts #16.
Tighten to torque value listed in Torque Value Chart on page 5.
Repeat for right-hand side.
Step 9
Install fairlead as shown below. Note that top holes in channel (Figure 8) align with bottom holes on
roller fairlead. Secure using capscrews, lockwashers, and nuts furnished with winch.
Figure 8
Figure 6