Ramsey Winch CHEVY WRAPAROUND & GRILL GUARD KITS 295934 & 295935 - Manual (Page 3)

2
Figure 3
Step 4
Note: You will need assistance for this step.
Have someone hold the center unit while you insert the
winch mounting channel #2 between side plates of center
unit #5. Channel shims #29 are inserted between the end of
the channel and the side plate of the center unit on both
sides. Secure each side of channel using (2) 3/8-16NC x 1
capscrews #16 with nuts #20 (Figure 3).
Step 5
Install upper mounting bracket #11 (Figure 4) on bumper using 3/8” x 1” bolt #16 and secure using
3/8 locknut #20 (Figure 5). Make sure top tab of left hand bracket is pointed toward the left side of
vehicle as shown below. Repeat for right hand side.
Step 6
Mount center unit on vehicle and secure each side at the lower support bracket using (3) 1/2” X 1-1/4”
capscrews #17 with (3) 1/2” nuts #21 (Figure 5). Attach each side of center unit to upper support
bracket using (1) 3/8-16NC x 1 capscrew #16 with nut #20.
DO NOT TIGHTEN HARDWARE.
Figure 5
Figure 4