Ramsey Winch CHEVY GRILL GUARD/WRAPAROUND KITS 295936 & 295937 - Manual (Page 2)

1
Step 1
Note: It is not necessary to remove or modify the vehicle bumper to install this mounting kit. Remove
and discard the M12 bolts at either side and bottom of the tow hook (Figure 1), remove tow hook and
set aside.
Step 2
Insert left hand frame mounting bracket assembly #7 through air dam. Replace tow hook and secure
using (3) 12 mm bolts #18 (Figure 2).
DO NOT TIGHTEN HARDWARE COMPLETELY.
Step 3
Repeat steps 1 & 2 above for right hand side. DO NOT TIGHTEN HARDWARE COMPLETELY.
Figure 1
Figure 2