Ramsey electrical winch model dc-7 series, Specifications: conforms to sae j706 – Ramsey Winch DC-7/DC-7B User Manual
Page 3
1
PLEASE READ THIS MANUAL CAREFULLY
This manual contains useful ideas in obtaining the most effi cient operation from your Ramsey
Winch, and safety procedures one needs to know before operating a Ramsey Winch.
WARRANTY INFORMATION
Ramsey Winches are designed and built to exacting specifi cations. Great care and skill go into
every winch we make. If the need should arise, warranty procedure is outlined on the back of
your self-addressed postage paid warranty card.
Please read and fi ll out the enclosed warranty card and send it to Ramsey Winch Company. If
you have any problems with your winch, please follow instructions for prompt service on all war-
ranty claims. Refer to back page for limited warranty.
*These specifi cations are based on recommended 1/4” diameter
extra improved plow steel wire rope.
**5th Layer does not conform to SAE J706
NOTE: The rated line pulls shown are for the winch only. Consult the wire rope manufacturer for wire
rope
ratings.
Rated Line Pull 1st Layer (Lbs.)................................................................................................3,000
(Kgs.)................................................................................................1,360
Total Gear Reduction: All Models...........................................................................................298:1
Weight: DC-7 ......................................................................................................70 Lbs.(32 Kgs.)
DCX-7 ....................................................................................................75 Lbs. (34 Kgs.)
DC-78 ....................................................................................................60 Lbs. (27 Kgs.)
DCX-78 ..................................................................................................65 Lbs. (29 Kgs.)
MAXIMUM GEAR BOX OIL TEMPERATURE SHOULD NOT EXCEED................................................................250
0
F.
Layer of Cable
2
3
4
5**
Rated Line Pull
Lbs.
2,600
2,300
2,000
1,800
per layer
Kgs.
1,170
990
900
810
*DC-7/78 Drum Cable
Ft
20
35
50
70
capacity per layer
M
6
10
15
21
*DCX-7/78 Drum Cable
Ft
40
65
95
125
capacity per layer
M
12
19
28
38
NO LOAD
1000# LOAD 2000# LOAD 3000# LOAD
LINE SPEED
FPM
FPM
FPM
FPM
VOLTS (MPM) AMPS (MPM) AMPS (MPM) AMPS (MPM)
AMPS
12
17
80
12
110
8
150
7
180
ALL MODELS
24
(5.2)
.
40
(3.7)
.
60
(2.4)
.
75
(2.0)
.
90
4
1
3,000
1,350
10
3
15
SPECIFICATIONS: Conforms to SAE J706
RAMSEY ELECTRICAL WINCH MODEL DC-7 SERIES
6
180
5
4
3
2
1
0
270
360
MINUTES
AMPS
90
120
160
190
1
2
3
4
5
0
MINUTES
AMPS
DUTY CYCLE
12 V
24 V
Winch duty cycles are shown below: