Ramsey Winch 80K WILDCAT WINCH - Manual (Page 12)

19. Remove the clutch cylinder #1 by removing the (2) cotter keys #204 and (2) pins #206 from
either end of the air cylinder #207.
20. The clutch cylinder support angle #8 can be removed by removing the four bolts #66 and nuts
#65 attaching it to the mounting angles.
21. Remove the clutch yoke #29 by removing center pivot bolt #21 and nut #65.
8
29*
65
21
NOTE:
VIEW SHOWN LESS DRUM AND ANGLE CUT AWAY FOR CLARITY
65
29*
1
* CLUTCH YOKE #29 SHOWN REMOVED
AND PARTIALLY INSTALLED
FOR CLARITY
206
204
204
206 207
209
202
66
66
10 OM-914207-0211-D