Qualcraft End Rail - Manual (Page 4)

MATERIAL IDENTIFICATION AND INSPECTION
There are 4 basic parts to the Stacker-Bracket system
.
Support Bracket Top Clamp Guard Rail Post End Rail
Part #SBBF Part # SBTC4,6,8,12 Part # SBGP Part # SBER
INSPECTION
Visually inspect all parts: brackets, clamps, guard-rail posts, and end
rails, for broken welds, bent components, or stripped threads. Inspect
planks and 2 x 4 rails for cracks and splits.
PRE-INSTALLATION
In the event that the parts aren’t pre-assembled, you’ll need to attach
the Top Clamp to the support bracket. (Be sure to match correct Top
Clamp with top plate size)
Using a small amount of thread lube, attach the Top Clamp to the
Support Bracket. Start the hex bolt by hand and then use the ratchet to
finish tightening approx. ¼ turn past snug. To avoid damaging the
threads, DO NOT use an impact wrench with this system at any time.
Page 3
Safety Monitor
The employer shall designate a competent person to monitor the safety
of other employees, and:
� Shall be competent to recognize fall hazards
� Shall warn an employee when it appears that the employee is
unaware of a fall hazard or is acting in an unsafe manner.
� Shall be on the same walking/working surface and within
visual sighting distance of the employee being monitored.
� Shall be close enough to communicate orally with the
employee.
� Shall have NO OTHER responsibilities which could take the
monitor’s attention from the monitoring function.
Summary
The most effective way to prevent job-related injuries is to implement
and maintain a proactive safety program. A proactive safety program
is one in which safety is a part of every decision made and activity
performed during the course of the workday. The skill level of
employees is such that it matches the job assignment, and appropriate
training is provided to maintain such skills. A proactive safety
program not only helps keep the workplace safe, but includes:
� Fewer work injuries
�
Lower compensation insurance
� Lower absenteeism
� Lower employee turnover
� Higher job efficiency
� Higher employee morale
� Higher quality of work
Since safety awareness is not instilled in all people, it must be taught.
However, all the training in the world cannot help those who cannot,
or will not, master a safe mental attitude. So be willing to learn and
enhance your safety skills in order to minimize the misery of accidents
or death.
Page 12