Qualcraft End Rail - Manual (Page 3)

NOTES
Page 13
INTRODUCTION
In the construction industry, falls are the leading cause of worker
fatalities. Each year, on the average, between 150 and 200 workers are
killed and more than 100,000 are injured as a result of falls at
construction sites. The standard for fall protection deals with both the
human and equipment-related issues in protecting workers from fall
hazards. The unique feature of our product is the way it attaches and
detaches to the top plate. After the entire roof is completed, you simply
remove the safety pin and the top clamp bolt, and then let the bracket
slip away from behind the frieze block.
OBJECTIVE
The objective of this booklet is to supplement the “Hands on” training
class provided by FRAME PRO PRODUCTS, LLC. The Stacker
Bracket System� is a safety tool designed for protecting workers who
perform stacking, fascia, sheathing, nailing, and any other roof edge
operations on construction sites. The Stacker Bracket� has been
designed and engineered to meet OSHA requirements for scaffolding
and fall protection.
In general the employers must ensure that:
� Safe work procedures are used.
� Workers are trained in the proper use and maintenance of
all aspects of your protection systems.
� System is inspected daily for modifications or any unsafe
condition.
� Daily inspections are documented and corrective actions
taken.
� Those erecting, dismantling or modifying the system are
under the direct supervision of a qualified person.
Page 2