Probuilt Professional Lighting Uplight v2 - Manual (Page 8)

QUESTIONS & ANSWERS
1. How often should I replace the tube?
Uplight uses a T8 triphosphor tube with an extended life of
20,000 hours due to the in-built high frequency
technology. However, we only recommend replacement of
the tube after failure.
2. Is Uplight suitable for indoor or outdoor use?
Uplight’s fitted with a 15A plug & socket which are rated to IP44 and are suitable for
indoor and outdoor use (IP44 = protected against solid objects over
1mm and water sprayed from all directions - limited
ingress permitted).
3. How hot does the light lens get in operation?
Low Wattage means low heat. Uplight is tepid to touch
even in continuous use. A low ambient temperature of 35°C
is given out and must be noted for indoor use.
4. How can I change the lighting intensity?
Uplight has a detachable aluminium reflector. A powered-up
Uplight provides 180º intense luminosity. When removed it
provides 360º flooded luminosity.
5. Can Uplight’s be linked together?
Yes, Uplight’s can be linked together in series. Please refer
to the ‘Linking Directions’ section of this guide.
6. Can I connect power tools to the power socket?
Defender do not advise the use of the power socket as a power
outlet for other equipment.
REPLACEMENT PARTS
Please refer to the parts diagram on page 10 and a full parts breakdown of Uplight
components on page 11.
1. Parts must only be replaced by an authorised repairer as
special tools are required.
2. Only genuine UPLIGHT spares should be used.
WHAT UPLIGHT v2 CAN BE USED FOR
Indoor Use
Plastering
Emergency lighting
Painting
Car body workshops
Domestic DIY
Internal refurbishment
PRODUCT SPECIFICATION
Rated Voltage 110V 50/60Hz
Mains input range 108-304 AC/DC
Operating Frequency 28-30 kHz
Temperature range -25ºC to 50ºC
.