Poly-Tex PT-30 - Manual (Page 19)

REV: AD-130626
GEARBOX
EXTENSION
RC1009
INSTRUCTIONS
12. ATTACH GEARBOX EXTENSION TO GEARBOX USING THE
BOLT PROVIDED. ATTACH GEARBOX TO TUBE ASSEMBLY
USING #12-14 x 1" SELF-DRILLING SCREW.
13. SLIDE GEARBOX GUIDE THROUGH GEARBOX AND BOLT
GUIDE TO GUIDE MOUNTING BRACKET.
14. ATTACH CHAIN TO HOOP BY DRILLING 3/8" HOLE THROUGH THE
SIDE OF HOOP APPROXIMATELY 77" UP FROM THE BOTTOM OF
THE HOOP. USE A 5/16" x 2-1/2" HEX BOLT, FLAT WASHER, LOCK
WASHER, AND HEX NUT TO ATTACH TO HOOP.
15. ATTACH CHAIN TO GEARBOX GUIDE USING 5/16" x 3/4" HEX BOLT,
FLAT WASHER, LOCK WASHER, & HEX NUT.
5/16" x 2-1/2" HEX
BOLT NB 1850,FLAT WASHER NB1886,
LOCK WASHER NB1862,
& HEX NUT NB1872
5/16" x 3/4" HEX BOLT NB1842,
FLAT WASHER NB1886, LOCK
WASHER NB1862, &
HEX NUT NB1872
GEARBOX GUIDE
RC1305
77"
3/8" THRU HOLE
(FIELD DRILL)
GUIDE MOUNTING
BRACKET RC1301
5/16" x 2" HEX
BOLT NB1848, LOCK
WASHER NB1862, &
HEX NUT NB1872
GEARBOX
GUIDE
SIDE POLY
GUIDE
MOUNTING
BRACKET
12" LOWER POLY
ROLL-UP
CURTAIN
ROOF POLY
UPPER RAIL
TUBE ASSEMBLY
LOWER
RAIL
CHAIN, RC1307
BASE,
MV1000